Foxconn NF4SLI7AA-8EKRS2 Raid manual User Manual
Page 30

28
3. Install Windows 2000/XP with RAID
1. Setup the desired RAID mode in BIOS setup.
2. Insert a WinXP installation CD.
3. Press the
Press F6 if you need to install a third party SCSI or RAID driver...
4. Insert the previous floppy disk (RAID driver installation disk).
5. Press to continue.
6. Press
4. Install RAID Driver
When you finish installing Operation System with RAID, in order to enable RAID
function, you need to install RAID Driver. Pls refer to Chapter 4 of motherboard
user manaul for installation steps.
This manual is related to the following products: