Foxconn Q45M - Manual (Page 38)

3
31
Super IO Configuration
Super IO Configuration
► Super IO Chip
This item shows the chip name which controls super IO devices.
► Floppy disk Controller
This item is used to enable or disable the floppy disk controller.
► Serial Port
This item is used to enable or disable the serial port.
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for the serial port.
► Device Mode
This item is used to change the serial port mode. Options are: [Normal] and [High Speed].
► Parallel Port
This item is used to enable or disable the parallel port.
► Device Settings
This item shows the resource assigned to the parallel port.
► Change Settings
This item is used to select an optimal settings for parallel port.
► Device Mode
This item is used to change the printer port mode.
Super IO Configuration Enable or Disable Floppy Disk
Controller
Super IO Chip ITE IT8720F
Floppy Disk Controller [Enabled]
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
Device Mode [Normal]
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5;
Change Settings [Auto]
Device Mode [STD Printer mode] →←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Version 1.24.1115. Copyright (C) 2008 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Advanced