Foxconn Q45M - Manual (Page 17)

10
2
10
Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the motherboard.
1. Apply and spread an even thermal
grease on the surface of CPU. 2. Mount the cooler on the mother-
board.
3. Fix the four screws. Fix one foot first,
then fix its diagonal foot partially and
fix the other two after. 4. Attach the 3-wire power connector
of the cooler to the CPU FAN socket
on the motherboard.
Remove CPU cooler from
motherboard :
1. Release the four screws.
2. Detach the fan power cable from the
motherboard.
3. Remove the CPU cooler carefully.
Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
C
AU
TI
O
N !