Foxconn G31MX Series - Manual (Page 37)

Chapter 2 BIOS Description
31
8.6 System/CPU Fan Speed
The current system /CPU fan speed will be automatically detected by the
system.
8.7 Smart Fan Control
This option is used to enable or disable smart fan function. Only when this
option is enabled, you can set some correlative parameters as follows.
PWM Start Temp(℃)
Allows you set the PWM start temperature which is initial temperature of
smart fan. When the temperature achieve the value and “Smart Fan Control”
is enabled, the smart fan will be turn on.
Start PWM Value
This option allows you to set the initial PWM value of smart fan.
Slope PWM Value
This option is used to set slope value of smart fan curve.
Deita Temp(℃)
This option is used to set the temperature delta. When the change amplit-
ude of temperature achieves the value, the PWM value will increase or
decrease by slope.
9.Load Optimized Defaults
This menu can let you load the optimized defaults set by BIOS, which have set
the optimized performance parameters of system to improve the performances
of system components. You can select or and then press to
load or not load the optimized defaults.
10-11.Set Supervisor/User Password
The access rights and permissions associated with the Supervisor password are
higher than those of a regular User password. The Supervisor password can be
used to start the system or modify the CMOS settings. The User password can
also start the system. While the User password can be used to view the current
CMOS settings, these settings cannot be modified using the User password.
When you select the Set Supervisor/User Password option, the following message
will appear in the center of the screen, which will help you to set the password:
Enter Password:
Enter your password, not exceeding 8 characters, then press . The
password you enter will replace any previous password. When prompted, key in
the new password and press .
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn