Foxconn G31MX Series User Manual
Page 33
Chapter 2 BIOS Description
27
3.11 APIC Mode
This option is used to enable or disable APIC function.
3.12 Delay For HDD(Secs)
This option is used to set the delay time of selecting the HDD controller.
3.13 Full Screen LOGO Show
This option allows you to enable or disable the full screen logo.
3.14 Small Logo (EPA) Show
This item allows you to enable or disable the EPA logo.
4.Advanced Chipset Features
4.1 PCI Express Root Port Func
This option is used to configure the PCI Express port.
4.2 System BIOS Cacheable
Select ”Enabled” to allow caching of the system BIOS which may improve
performance. If any other program writes to this memory area, a system
error may result.
4.3 Memory Hole At 15M-16M
This item is used to determine whether the 15M-16M address field of memory
is reserved for the ISA expansion card.
4.4 PEG/Onchip VGA Control
This item is used to enable or disable PEG and onboard VGA.
4.5 On-Chip Frame Buffer Size
This item is used to set the VGA frame buffer size.
Note: This function does not work when the external display card is used.
4.6 DVMT Mode
This item is used to set the DVMT mode.
4.7 DVMT/FIXED Memory Size
This item is used to set the DVMT/FIXED memory size.
4.8 Init Display First
This item is used to select the initial display device used when your PC starts
up.
Advanced Chipset Features Menu
PDF 文件使用 "pdfFactory" 试用版本创建