Foxconn G31MX Series - Manual (Page 32)

Chapter 2 BIOS Description
26
3.Advanced BIOS Features
Advanced BIOS Features Menu
3.1 CPU Feature
You can press to set the items of CPU feature.
3.2 Removable Device Priority
This option is used to select the priority for removable device, e.g. floppy.
3.3 Hard Disk Boot Priority
This option is used to select the priority for HDD startup. After pressing
, you can select the HDD using the Up / Down arrow keys,
and change the HDD priority using / or <+> / <->;
you can exit this menu by pressing .
3.4 CPU L1&L2 Cache
This option is used to turn on or off the L1 and L2 CPU cache.
3.5 Hyper-Threading Technology
Enable or disable Hyper-Threading technology.
3.6 First/Second/Third Boot Device
Allows you to set the boot device’s sequence.
3.7 Boot Other Device
While enabled, the system will boot from some other devices if the first/
second/third boot devices failed.
3.8 Boot Up Floppy Seek
This option controls whether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (either due to improper configuration or physical
unavailability), it will appear an error message.
3.9 Boot Up NumLock Status
Allows you to select the power-on status for the NumLock. The available
setting values are: On and Off.
3.10 Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup
screen; When it is set to “System”, a password is required not only to enter
CMOS Setup, but also to start up your PC.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn