Foxconn 945PL7AE-8KRS2HV - Manual (Page 43)

Chapter 3 BIOS Description
36
v Onboard FDC Controller
This option is used to set whether the Onboard FDC Controller is enabled.
The available setting values are: Disabled and Enabled.
v Onboard Serial/IrDA Port
This option is used to set the serial and IrDA ports.
v IrDA Duplex Mode
This option is used to set the mode of IrDA .
v Onboard Parallel Port
This option allows you to determine onboard parallel port controller I/O ad-
dress and interrupt request (IRQ).
v Parallel Port Mode
Select an address and corresponding interrupt for the onboard parallel port.
The setting values are: SPP, EPP, ECP, ECP+EPP.
v ECP Mode Use DMA
When the Parallel Port Mode is set to ECP or ECP+ EPP, this option is used to
select the channel for the ECP mode. The setting values are: 1 and 3.
SuperIO Device Menu
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn