Foxconn 945PL7AE-8KRS2HV - Manual (Page 17)

Chapter 2 Installation Instructions
10
Memory
This motherboard includes two 240-pin DIMM slots. So You must install at least
one memory bank to ensure normal operation.
Installation of DDR2 Memory
1. There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
128 Pins 112 Pins
For the detailed memory support list on this motherboard, please visit the
website:
http://www.foxconnchannel.com
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ Æ www.fineprint.com.cn