Chapter 2 installation instructions – Foxconn 945PL7AE-8KRS2HV User Manual
Page 20
Chapter 2 Installation Instructions
13
Audio Connector: F_AUDIO(for -6
models)
The audio interface provides two kinds
of audio output choices: the Front
Audio,the Rear Audio.Their priority is
sequenced from high to low(Front Au-
dio to Rear Audio).If headphones are
plugged into the front panel of the
chassis(using the Front Audio),then
the Line-out (Rear Audio) on the rear
panel will not work. If you don’t want to
use the Front Audio, pin 5 and 6,pin 9
and 10 must be SHORT, and then the
signal will be sent to the rear audio
port.
AUD_OUT-L
NA
MIC_IN
MIC_PWR
F_AUDIO
MIC_GND
+5VA
AUD_OUT-R
AUD_RET-R
Empty
AUD_RET-L
1
Audio Connector: F_AUDIO(for -8
models)
The audio interface provides two kinds
of audio output choices:the Front Audio,
the Rear Audio.Their priority is the
same.Front Audio supports retasking
function.
1
F_AUDIO
PORT2_L
SENSE_SEND
PORT1_L
PORT1_R
PORT2_R
AUD_GND
PRESENCE_J
SENSE1_RETURN
SENSE2_RETURN
Empty
Speaker Connector: SPEAKER
The speaker connector is used to con-
nect speaker of the chassis.
SPEAKER
1
SPKJ
NC
SPKJ
Empty
PDF 文件使用 "pdfFactory" 试用版本创建