Foxconn Q57M - Manual (Page 45)

3
38
load fail-Safe Defaults
If you encounter any system unstable problem, you may try to load Fail-
Safe defaults, which are the safest and most stable BIOS settings for the
motherboard.
Select this option and press . A dialogue box pops out, press
then press to load the defaults; press and press to
skip.
The BIOS have set the basic and safest default functions to ensure the stability of your system. If
your computer fails to run properly, then you may load this default to recover the system back to
normal, and carry out failure analysis in next steps.
Load Optimized Defaults
Select this option and press . A dialogue pops out, select
then press to load the defaults; press to skip.
By this default, BIOS have set the optimized performance parameters of
system to improve the performances of system components. But if the
optimized performance parameters to be set cannot be supported by your hardware devices, the
system may fail to work. It may happen on when you installed too many add-on cards on your
system, or overloaded the hardware until it can not afford.
Save & Exit Setup
When you select this option and press ,
Select to save your changes to CMOS and exit the
program;
Select or to return to the main menu.
Exit Without Saving
If you select this option and press ,
Select to exit CMOS without saving your modifications;
Select or to return to the main menu.
Save configuration changes and exit setup?
[OK] [Cancel] [OK]
Load Optimal Defaults?
[OK] [Cancel] [OK]
Load Fail-Safe Defaults?
[OK] [Cancel] [OK]
Exit Setup Without Saving ?
[OK] [Cancel] [OK]