Ide configuration – Foxconn Q57M User Manual

Page 33

► Hyper Threading

This item is used to enable/disable the Hyper Threading Technology feature.

► Active Processor Cores

This item is used to set the number of cores to enable in each processor package.

► A20M

Legacy OSes and APs may need A20M enabled.

► EIST

You can select the EIST (Processor Power Management, PPM) through this item.

► Intel(R) C-STATE Technology

This item is used to enable/disable C-State. C-State means CPU idle is set to C2/C3/C4.

IDE Configuration

► Configure SATA as

This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can
configure the SATA ports to support IDE mode.

► SATA#1 IDE Configuration

SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the
mode of the SATA ports. Setting values are: [Compatible], [Enhanced].

► SATA#2 IDE Configuration

Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically adjust
processor voltage and core frequency, which can result in decreased average power
consumption and decreased average heat production. There are some system require-
ments must be met, including CPU, chipset, motherboard, BIOS and operation system.
Please refer to Intel Website for more information.

IDE Configuration

Configure SATA as

Help Item

SATA #1 Configuration

[Enhanced]

SATA #2 Configuration

[Enhanced]

IDE Detect Time Out

[35] IDE

RAID

AHCI

Disabled

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults

[IDE]

Options