Pnp/pci configurations – Foxconn Q57M User Manual

Page 42

Text mode
Original mode

PnP/PCI Configurations

PnP/PCI Configurations

Clear NVRAM

Help Item

Plug & Play O/S

[No]

PCI latency Timer

[64]

Clear NVRAM during

System Boot.

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults

[Disabled]

► Clear NVRAM

This item is used to set whether clear NVRAM during system booting or not.

Setting options: [Enabled] and [Disabled].

► Plug $ Play O/S

This item is used to configure the Plug and Play(PnP) devices.
[No]: lets the BIOS configure all the devices in the system.
[Yes]: lets the operating system configure Plug and Play (PnP) devices not required for boot if
your system has a Plug and Play operating system.

► PCI Latency Timer

This item is used to set the value in units of PCI clocks for PCI device latency timer register.