Foxconn P67A Series - Manual (Page 47)

3
40
Security
► Administrator Password
This item is used to install or change administrator password.
After you input administrator password, it then will ask you to
confirm the password.
► User Password
This item is used to install or change user password.
“HDD Security Configuration” appears only when you connect HDD to your system. Press “Enter”
key on the item “HDD 0:ST3160815AS” to enter into the “HDD Password Configuration” interface,
then press “Enter” on “Set HDD Password” to set, modify and clear HardDisk password. HDD
Password need to be installed for enabling Security.
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Power Health Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password must be 3 to 20 characters long.
Administrator Password
User Password
HDD Security Configuration:
HDD 0:ST3160815AS
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Setup Administrator
Password
Security