Foxconn P67A Series - Manual (Page 34)

3
27
value.
► Host Clock Override (1/100MHz)
This item is used to set the Host Clock Override. You can use [+] or [-] to adjust the value.
► CPU Voltage (1/10000 Volt)
This item is used to change the CPU voltage in a step of 40V. The voltage can be increment-
ed from 40V to 10000V. You can use [+] or [-] to adjust the value.
► Power Limit 1 Value (Watt)
This item is used to set the first power limit. You can use [+] or [-] to adjust the value. The set-
ting value: 0 - 500.
► Power Limit 2 Switch
This item is used to enabled/disabled the power limit 2.
► Power Limit 2 Value
This item is used to set the second power limit. You can use [+] or [-] to adjust the value. The
setting value: 0 - 500.
► EIST
You can select the EIST (Processor Power Management, PPM) through this item.
► Turbo Mode
This item is used to set the mode of the Turbo.
► 1-Core/2-Core/3-Core/4-Core Ratio Limit
This limit is for 1/2/3/4 core active. 0 means using the factory-configured value.
Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically adjust
processor voltage and core frequency, which can result in decreased average power
consumption and decreased average heat production. There are some system require-
ments must be met, including CPU, chipset, motherboard, BIOS and operation system.
Please refer to Intel Website for more information.
CA
UT
IO
N
!