Dixon RAM 48ZT BF - Manual (Page 35)

maIntenanCe
35
WARNING!
Before performing any service or adjustment checklist:
Engage the parking brake. •
Place the Blade-switch in the disengaged position. •
Turn the ignition switch to OFF position and remove the key. •
Make sure the blades and all moving parts have completely stopped. •
Disconnect the spark plug wire from all spark plugs and place the wire where it cannot •
come in contact with the plug.
1) first change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty
conditions, cleaning and replacement are required more often. 3) Performed by authorized service workshop.
● = described in this manual
♦ = Not described in this manual
Maintenance At
least
once
each
year
Maintenance
Wkly
interval
Daily in hours
Before After 25 50 100 300
Check/adjust throttle cable
●
Check the condition of belts, belt pulleys
● ●
Change the engine oil 1)
● ●
replace the engine oil filter
● ●
Clean/replace the spark plugs
● ●
replace the fuel filter
● ●
replace the air filter (paper filter) 2)
● ●
Check the caster wheels (every 200 hours)
●
replace the air cleaner’s pre-filter 2) (foam)
●
Check/adjust the mower deck
● ●
Check the engine valve clearance 3)
♦ ♦
Perform the 300-hour service 3)
♦ ♦
Check hydraulic oil at reservoir
●
Change hydraulic oil & filter (200 hours)
●
Clean fins of oil cooler (Kohler)
● ●