Foxconn D42S 3.0 - Manual (Page 34)

27
3
Integrated Peripherals
► IDE Configuration / OnBoard Configuration / SuperIO Configuration / USB Configuration
Press to go to relative submenu.
IDE Configuration
► Configure SATA as
This item allows you to set the operation mode of the SATA ports. Setting values are: [IDE],
[AHCI], [Disabled].
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Integrated Peripherals
► IDE Configuration [Press Enter] Help Item
► OnBoard Configuration [Press Enter]
► SuperIO Configuration [Press Enter] Configure the IDE
► USB Configuration [Press Enter] device(s) .
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
IDE Configuration
IDE Configuration Help Item
Configure SATA as [IDE]
IDE
AHCI
Disabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[IDE] Options