Foxconn D255 - Manual (Page 29)

22
3
► TPM SUPPORT
This item is used to decide whether to support TPM (Trusted Platform Module) device function.
Default option is [Disabled]. If you want to support TPM, first you need to install a TPM device
on the motherboard and set this item to [Enabled], then save changing and reset your compu-
ter, otherwise the operation system can not show the relative information.
North Bridge
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
North Bridge Configuration
Memory Information
Total Memory 2048 MB (DDR3 1067)
Memory Slot1 Not Present
Memory Slot2 2048 MB (DDR3 1067)
Memory Configuration
Integrated Graphics [Auto]
IGD Memory [256MB]
DVMI/FIXED Memory [256MB]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Keep IGD enabled based on the
setup option
Advanced
Memory Information
► Total Memory
This item displays the current memory size. The size is depending on how many memory mod-
ules are installed in your system before powering on.
► Memory Slot 1/2
These items display the memory size installed on each slot.
ay time (in clock cycles).
►Integrated Graphics
This item is used to set the mode of the Integrated Graphics.
► IGD Memory
This item is used to select the IGD(Integrated Graphics Device) share memory size. Default
value is [256MB].
► DVMT/FIXED Memory
Select graphics memory size for Fixed or DVMT usage.