Foxconn D255 - Manual (Page 15)

8
2
2-1 Install the Memory
If you take a look at front side of memory module, it has asymmetric pin counts on both sides
separated by a notch in the middle, so it can only fit in one direction. Follow the steps below to
correctly install your memory modules into the sockets.
Read the following guidelines before you begin to install the memory :
■
Make sure that the motherboard supports the memory. It is recommended that memory
of the same capacity, brand, speed, and chips be used.
■ Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
■ Memory modules have a foolproof design. A memory module can be installed in only
one direction. If you are unable to insert the memory, switch the direction.
■ Be sure to install DDR3 DIMMs on this motherboard.
C
AU
TI
O
N
!
204-Pin
2.The clips at both ends of the socket will
snap into place when the memory moule
is securely inserted and pressed.
Notch
1.Place the memory module onto the
socket, then push it down firmly.