System information – Foxconn A9DA User Manual
Page 29
3
22
System Information
This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
► Date (mm:dd:yy)
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are
► SATA1 / SATA2 / SATA3 / SATA4 / SATA5 / E-SATA
When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically
detects the presence of SATA devices.
SATA1 is the lower SATA port of SATA1_SATA2 of the motherboard.
SATA2 is the upper SATA port of SATA1_SATA2.
SATA3 is the lower SATA port of SATA3_SATA4.
SATA4 is the upper SATA port of SATA3_SATA4.
SATA5 is the lower SATA port of SATA5_ESATA.
E-SATA is the upper SATA port of SATA5_ESATA.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
System Information
Date (mm:dd:yy)
[Fri , 12/26/2009]
Help Item
Time (hh:mm:ss)
[11 : 59 : 49]
► SATA Port 1
[Not Detected]
Use [Enter], [TAB]
► SATA Port 2
[Not Detected]
or [SHIFT-TAB] to
► SATA Port 3
[Not Detected]
select a field.
► SATA Port 4
[Not Detected]
► SATA Port 5
[Not Detected]
Use [+] or [-] to
► eSATA Port
[Not Detected]
configure the system
Date.
Halt On
[All Errors, But ...]
Keyboard
[Disabled]
Mouse
[Enabled]
Model Name :A9DA-S/A9DA
BIOS ID
:994F1D12
BIOS Version
: 08.00.15
Memory Size
: 2048MB
MAC Address
:00-00-00-00-00-00
CPU Name : AMD Phenom(tm) II X4 945 Processor
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F2/F3:Change Colors
F9:Optimized Defaults
12