Foxconn A7GMX Series - Manual (Page 34)

3
27
► PCI Express Clock
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
► CPU Multiplier Adjust (Optional only if CPU supports)
This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU. This option will be displayed
only if your CPU is supporting this feature.
► Spread Spectrum
If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But if overclocking is activated,
you had better disable it.
Voltage Options
► CPU Voltage Control
This option is used to change the CPU voltage in a step of 25mV. The voltage can be
incremented from +25mV to +775mV.
► Memory Voltage Control
This option is used to change the DRAM voltage in a step of 50mV. The voltage can be
incremented from +50mV to +600mV.
► NB Voltage Control
This option is used to change the North Bridge voltage in a step of 30mV. The voltage can be
incremented from +30mV to +360mV.
► HT/SB Voltage Control
This option is used to change the HyperTransport/South Bridge voltage in a step of 30mV. The
voltage can be incremented from +30mV to +360mV.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Voltage Options
CPU Voltage Control [Disabled] Help Item
Memory Voltage Control [Disabled]
NB Voltage Control [Disabled]
HT/SB Voltage Control [Disabled]
Disabled
+25mV
+50mV
+75mV
+100mV
+125mV
+150mV
+175mV
+200mV
+225mV
+250mV
+275mV
+300mV
+325mV
+350mV
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Disabled]
Options