Foxconn A78AX-K - Manual (Page 33)

3
26
► Smart Power LED (Optional)
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also pre-
vents user without password trying to get into your computer through smart boot menu.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB/HTT Speed
This item displays the current Front Side Bus speed.
► Current CPU Multiplier
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM speed.
Fox Intelligent Stepping
► CPU Clock Adjust
This option is used to adjust the CPU clock.
► PCIE Clock Adjust
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Fox Intelligent Stepping
CPU Clock Adjust [200] Help Item
PCIE Clock Adjust [100]
CPU Frequency Multiplier [Auto]
Spread Spectrum [Enabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit
F1:General Help F9:Optimized Defaults
200
System Status Power LED Status Stop Blinking Condition
Normal Always On Always On
No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK
No Display Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK
Post Error Message
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Enter Setup or Skip
No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK