Foxconn nT-270 - Manual (Page 15)

3
11
Make sure you have these ready:
1. NETDVD. (It is an optional accessory. If there is no NETDVD in this package, you need other
purchase an external USB DVD-ROM drive.)
2. NETBOX driver CD. (In this package)
3. Windows XP Install CD. (Other purchase)
Before we continue:
■ Your NETBOX power is off.
■ Connect the NETDVD or USB DVD-ROM drive to one USB port of NETBOX and power it on.
3-1 Install Windows XP
1. Push power on button to turn on your computer, then press key to enter BIOS Setup.
2. Put the Windows XP Install CD into the USB DVD-ROM drive.
3. Select and go to the “Boot” menu, enter “Boot Device Priority”, set the “1st Boot Device” to
“USB: Optical DVD RW”, press key to save change and exit BIOS.
Boot Device Priority Specifies the boot
sequence from the
1st Boot Device [USB:Optical DVD RW] available devices .
2nd Boot Device [SATA:PM-FUJITSU MH]
3rd Boot Device [USB:Generic STORAG]
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Boot
BIOS SETUP UTILITY