Formax FD 4040 - Manual (Page 9)

8. Install adjustable height drop tray (Fig 12 item A) into slots in leg assembly (Fig 11 item B).
9. Install envelope stop plate (Fig 12 item C) onto drop tray using 2 hand wheel nuts provided (Fig 12 item D).
10. Place envelope side guides (Fig 12 item E), magnetically mounted, onto drop tray.
7
D
C
B
C
E
A
Fig 12
11. Attach the mounting bracket (Fig 13 item A) to the conveyor. This bracket is used to secure the conveyor to the
table that the delivery device (i.e. printer) sits on. See mounting details supplied with the bracket. Do not attach
bracket to table until correct conveyor height has been determined (see page 9).
Fig 13
A