Formax FD 4040 - Manual (Page 13)

6. To raise or lower drop tray (Fig 18 item A), insert hooks on drop tray into slots (Fig 18 item B) in leg assembly at
desired height.
7. To move envelope stop plate position (Fig 18 item C), loosen 2 hand wheel nuts (Fig 12 item D), and reposition
stop plate to accommodate the media, then tighten hand wheel nuts.
8. Position envelope side guides (Fig 18 item E), magnetically mounted, at desired location.
9. Send several test pieces of media through delivery device and conveyor to ensure correct set up.
Make adjustments if necessary.
10. The conveyor is now ready for operation.
B
C
E
A
Fig 18
11