Formax FD 4040 - Manual (Page 6)

2. Mount envelope knockdown assembly onto the in-feed of the conveyor (Fig 7 item D) using 6 each white Phillips
head machine screws provided in accessory bag. NOTE: The suction fans are located at the in-feed of the
conveyor. Loosen knockdown post thumb screw (Fig 6 item B) and rotate post 90 degrees into an upright position
(Fig 7).
3. Mount the outfeed bracket (Fig 7 item E) to the opposite end of the conveyor using the 4 white phillips head
machine screws. Do not completely tighten screws. Continue to step 4 for bracket adjustment.
4
fans
In-feed
Out-feed
D
Mounting Screws
E
Mounting Accessories
1 Envelope knockdown bracket assembly (Fig 6): To install, temporarily mount the envelope knockdown post (Fig 6
item A) in the down position, as shown below. Use thumb screw and securing plate (Fig 6 items B & C) to attach the
post to the bracket.
C
A
B
Fig 6
Fig 7