Formax FD 280-10 - Manual (Page 8)

3. POWER CONNECTION
WARNING
BEFORE PLUGGING THE FEEDER INTO AN
OUTLET, CAREFULLY READ THE FOLLOWING
INFORMATION ABOUT VOLTAGES AND THE
POWER CORD.
3.1 Safety
The FD 280-10 can connect to any power distribution
system, including the European IT Power System.
Because the European IT Power System does not have a
grounded neutral leg, the FD 280-10 uses protective
fusing in both the neutral and hot supply lines of power.
WARNING
A BLOWN FUSE IN THE NEUTRAL LEG COULD
MEAN INTERIOR PARTS OF THE FEEDER
REMAIN AT A HAZARDOUS VOLTAGE. ALWAYS
UNPLUG THE POWER CORD BEFORE REMOVING
COVERS FROM THE FEEDER.
3.2 Line Voltage
The FD 280-10 is rated for continuous operation using a
variety of supply voltages. The manufacturer configures
the FD 280-10 to operate with the voltage requested by
the customer. Power connects to the entry end of the
FD 280-10.
3.3 Power Cord
1. Plug the POWER CORD into the APPLIANCE INLET
on the entry end of the FD 280-10.
WARNING
TO PREVENT ELECTRICAL SHOCK, ONLY PLUG
THE POWER CORD INTO A GROUNDED OUTLET.