Formax FD 280-10 - Manual (Page 5)

1. INTRODUCTION
1.1 Feeder
Description
The FD 280-10 Feeder is designed to be used with a
variety of printing and forms processing devices. It is most
commonly used with tabbing and printing machines. The
FD 280-10 feeds a wide variety of materials, and can be
controlled by the processing device, creating a truly
integrated system.
1.2 Items Included
FD 280-10 Feeder
Power Cord
Output Wheel assembly
Tail Support Bar
Interconnect Cable
(4) Risers / Feet
Paper Stop assembly
(3) Output Bridges
(6) sets of magnetic Output Guides
Hardware
Operating Manual
1.3 Operating
Manual Safety
Terms
The following highlighted blocks are used throughout this
manual to emphasize important information. Pay careful
attention to this information.
WARNING
ALERTS YOU TO ACTIONS OR CONDITIONS
WHICH MAY PRESENT HAZARDS OR CAUSE
INJURY TO PERSONNEL.