Formax Cut-True 13M - Manual (Page 9)

7. Grasp the blade lever arm and lower it slightly while
at the same time sliding the safety lever to the right
(inset) to engage the blade lever arm.
8. Use both hands to grasp the blade lever arm and
bring it down to cut through the paper stack. When
the cut is complete, raise the lever arm to its top
position until it locks into place.
9. Move the clamping lever to the right to raise the
clamp and release the paper.
10. Lift the front safety cover.
11. Loosen the back gauge thumbscrew and slide the
back gauge forward to safely remove the paper.
Important Note: When cutting pieces less than
2” insert the longer side of the document for safe
removal after cut.
6