Formax Cut-True 13M - Manual (Page 5)

ASSEMBLY
2
Rear Safety Cover
Rear safety
cover
Blade lever
arm
Remove the four screws indicated in fig 1. Insert the rear safety cover with the notch under the clamping lever
arm (fig. 2). Attach the rear safety cover by reinstalling the screws (fig 3).
Blade Lever Arm
Screw the blade lever arm into the
lever arm base and hand tighten.
Batteries
Install the two “C” batteries for the laser
light into the holder on the underside of
the cutter.
Fig. 1 Fig. 2 Fig. 3
Batteries