Formax FD 372 - Manual (Page 18)

18
(8) Adjustments
(A) Feed Angle /Skew Adjustments
If the folding position is slanted because the edges of
the paper are slanted or for other reasons, it can be
adjusted using the feed angle adjustment knob.
(B) Fine Adjustment
Move the stopper using the stopper fine adjustment
knob.
Caution:
In case the stopper fine adjustment knob is moved,
when the Test key is pressed, the machine will continue
to fold. When the Start/Stop key is pressed, the
machine will start to fold after the stopper is returned to
the previous position
Note:
When the stopper is moved more then a few mm, it
will be convenient to use the +/-key.
Adjusting Table 1
Press the Select key and select the Table 1 stopper
move mode. Next press the +/- key and move the
stopper to the desired position.
Feed angle adjustment knob