Formax FD 372 - Manual (Page 10)

10
(6)Preparation
Install Table 1 and 2.
Insert the front cut-away section of Table 1 onto the
stud (1) of the machine and drop its rear cut-away
section on the stud (2). Insert the plug into the
connector (3).
Caution:
The connector will only go in one way,
Insertion by force may cause trouble.
Insert the front cut-away section of Table 2 into the
stud (4) of the machine and drop its rear cut-away
section on the stud (5). Insert the plug into the
connector (6).
Caution:
The connector will only go in one way,
Insertion by force may cause trouble.
Pull the paper-stacking table out and set it while lifting
the auxiliary table.