Fluke Biomedical 05-450 - Manual (Page 12)

05-450
Users Manual
4
• Only certified technician or calibration personnel should
replace battery.
• Do not touch the circuit board in the calibration window due
to potential for electric shock.
• Do not touch the center pin of the detector connector
unless the unit has been turned off and power has been
removed or at least 1 minute.
• To prevent contact with internal hazardous live parts that
are accessible using a tool: turn off the Product and
disconnect the power cord. Allow the Product to sit for
1 minute before accessing internal components.
Symbols
Table 1 shows the symbols used in this manual or on the Product.
Table 1. Symbols
Symbol Description
 Risk of Danger. Important information. See Manual.
 Hazardous voltage. Risk of electric shock.
 AC (Alternating Current)
 Protective conductor terminal

This product complies with the WEEE Directive (2002/96/EC) marking
requirements. The affixed label indicates that you must not discard this
electrical/electronic product in domestic household waste. Product
Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted
municipal waste. Go to Fluke’s website for recycling information.