Fluke Biomedical IDA-1S Getting Started - Manual (Page 19)

Infusion Device Analyzer
General Specifications
11
General Specifications
Battery Power ........... 4 x Panasonic HHR210AB NiMh
2000 mAh batteries
Charger
Operating Voltage
Range ..................... 100 V ac to 240 V ac
Supply Frequency ... 50 Hz / 60 Hz
Supply Power ......... <20 VA
Size (HxWxD) ............ 30 cm x 17 cm x 10 cm (12 in x
8 in x 4 in)
Weight ....................... ~1.2 kg (2.7 lb)
Temperature
Operating ................ 15 °C to 30 °C (59 °F to 86 °F)
Storage ................... -20 °C to +40 °C (-4 °F to +104 °F)
when drained of all liquid.
Humidity .................... 10 % to 90 % non-condensing
Altitude ...................... 0 meters to 2000 meters
(6500 feet)
Safety ........................ IEC 61010-1: Overvoltage
category II, Pollution Degree 2
Electromagnetic
Environment .............IEC 61326-1: Basic
Emissions
Classification ............IEC CISPR 11: Group 1, Class A.
(Group 1 have intentionally generated and/or use
conductively coupled radio-frequency energy which is
necessary for the internal functioning of the equipment
itself. Class A equipment is suitable for use in non-
domestic locations and/or directly connected to a low-
voltage power supply network.)
FCC ............................CFR47: Class A Part 15 subpart B
Storage of Results ....Test results stored for later
viewing, printing or transfer to PC.
Typical practical capacity:
100 tests
Power Down ..............The results of tests in progress will
be saved in the case of accidental
power down
Computer Control .....The Product can be fully controlled
from a PC using HydroGraph
software