Fluke Biomedical IDA-1S Getting Started - Manual (Page 10)

IDA-1S
Getting Started Manual
2
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the
equipment under test.
Warning
To prevent possible electrical shock, fire, or
personal injury:
• Read all safety information before you
use the Product.
• Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
• Remove the batteries if the Product is
not used for an extended period of time,
or if stored in temperatures above 50
°C.
If the batteries are not removed, battery
leakage can damage the Product.
• The battery door must be closed and
locked before you operate the Product.
• Replace the batteries when the low
battery indicator shows to prevent
incorrect measurements.
• Carefully read all instructions.
• Do not touch voltages >30 V ac rms,
42 V ac peak, or 60 V dc.
• Do not use the Product around explosive
gas, vapor, or in damp or wet
environments.
• Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
• Use this Product indoors only.
• Use only the mains power cord and
connector approved for the voltage and
plug configuration in your country and
rated for the Product.
• Replace the mains power cord if the
insulation is damaged or if the insulation
shows signs of wear.
• Use only the external mains power
supply included with the Product.
• Remove all probes, test leads, and
accessories before the battery door is
opened.