Fluke Biomedical QA-ES Automation Bundle - Manual (Page 25)

ESU Automation Kit
How to Clean Bundle Components
17
How to Clean Bundle Components
 Warning
To avoid electric shock, do not clean the
bundle components while connected to the
Analyzer or UUT.
 Caution
Do not pour fluid onto the bundle component
surfaces; fluid seepage into the electrical
circuitry may cause the component to fail.
Do not use spray cleaners on the
components; such action may force cleaning
fluid into the components and damage
electronic components.
Clean the bundle components utilizing a damp cloth and
mild detergent. Take care to prevent the entrance of
fluids.
Wipe down the adapter cables with the same care.
Inspect them for damage to and deterioration of the
insulation. Check the connections for integrity before
each use.