Fluke Biomedical DPM1B - Manual (Page 12)

DPM1B
Operators Manual
2
• The battery door must be closed and locked
before you operate the Product.
• Replace the battery when the low battery indicator
shows to prevent incorrect measurements.
• Use the correct terminals, function, and range for
measurements.
• Do not use the Product around explosive gas,
vapor, or in damp or wet environments.
• Do not use the Product if it operates incorrectly.
• Examine the case before you use the Product.
Look for cracks or missing plastic. Carefully look
at the insulation around the terminals.
• Use this Product indoors only.
• Remove all probes, test leads, and accessories
before the battery door is opened.
• Remove all probes, test leads, and accessories
that are not necessary for the measurement.
• Disable the Product if it is damaged.
• Do not use the Product if it is damaged.
 Caution
To avoid possible damage to the Tester:
• Do not connect Tester to a sterile environment unless
a new sterile filter is used.
• Do not allow any liquid into the pressure port of the
transducer. Use the provided filter between the Tester
and liquid.