Flowserve NRG 16-40 - Manual (Page 8)

8
Corrosion resistance
When used for its intended purpose the safe functioning of the electrode will not be impaired by
corrosion.
Technical Data
continued
Sizing
The electrode body must not be subjected to sharp increases in pressure. Welds and flanges of the
electrode are designed to withstand dynamic loading (bending and alternating stress). The dimensional
allowances for corrosion reflect the latest state of technology.
Name plate / marking
Fig. 1
Designation of
the equipment
TÜV . SWB / SHWS.
02 - 403
0525
GESTRA AG
Münchener Str. 77
D-28215 Bremen
18-36 V DC 0,5 µS/cm >
Betriebsanleitung beachten
See installation instructions
Voir instructions de montage
Tmax = 70 °C (158 °F)
IN/OUT: CAN-Bus
PN 63
PN 160
PN 40
Pma Pmax
Tma
Tmax
NRG 17 - 40
NRG 19 - 40
NRG 16 - 40
G 3 /4 1.4571 IP65
60 bar (876 psi)
275 °C (527 °F)
32 bar (464 psi)
238 °C (460 °F)
100 bar (1450 psi)
311 °C (592 °F)
Node ID: _ _ _ _ _ _
VS-Nr.: 08 Mat-Nr.: 392084
0525
GB Reg. Design 2 053 113
US Pat . 5 719 342, 5 805 052,
Design 383 403
18-36 V DC 0,5 µS/cm >
Tmax = 70 °C (133 °F )
IN/OUT: CAN-Bus
Pmax Pmax
Tmax
Tmax
NRG 111 - 4 0
G 1 1.4529 IP65
180 bar (2611 psi)
357 °C (675 °F)
Node ID: __ __ __
Münchener Str . 77, D-28215 Bremen
SER Nr.:
GESTRA AG
TÜV .
SWB / SHWS . 02 - 403
Betriebsanleitung beachten
See installation instructions
Voir instructions de montage