Flowserve BA46 - Manual (Page 9)

9
Technical Data
– continued –
Overall lengths
End connection [mm]
[inch]
5
½
0
¾
5 3
¼
40
½
50
Flange Class 50 L 50 50 60 80 30 30
Flange Class 300 L 50 50 60 80 30 30
Flange Class 400 L 6 6 50
Butt-weld ends L 00 00 00 00 50 50
Socket-weld ends L 00 00 00 00 50 50
Flange PN 40 L 50 50 60 80 00 30
Flange PN 63 L 90 0 50
Weight BA 4... [kg] 4.7 5.3 5.8 7. 0.7 .5
Weight BAE 4... [kg] 8.8 9.4 9.9 . 4.8 6.6
The valve body must not be subjected to sharp increases in pressure. The sizing and dimensional
allowances for corrosion reflect the latest state of technology.
Sizing
Corrosion resistance
When used for its intended purpose, the safe functioning of the equipment will not be impaired by
corrosion.
Dimensions of end connections
Outside diameter of pipe x wall thickness
Butt-weld ends for pipe*) [DN] 5 0 5 3 40 50
EN PN 40 .3 x 6.9 x .3 33.7 x 3.4 4.4 x .6 48.3 x .6 60.3 x .9
EN PN 63 .3 x 6.9 x .6 33.7 x .6 4.4 x .9 48.3 x .9 60.3 x .9
ASME Schedule 40 CL50/300 .3 x .8 6.7 x .9 33.4 x 3.4 4. x 3.6 48.3 x 3.7 60.3 x 3.9
ASME Schedule 80 CL400/300 .3 x 3.7 6.7 x 3.9 33.4 x 4.5 4. x 4.8 48.3 x 5. 60.3 x 5.5
Inside diameter x depth
Socket-weld ends EN/ASME**) [DN] 5 0 5 3 40 50
EN/ASME .8 x 0 7.3 x 3 34. x 3 4.8 x 3 48.8 x 3 6.3 x 6
*) The dimensions (outside diameter of pipe x wall thickness) refer to the connecting pipe, not to the dimensions
of the butt-weld end!
**) The dimensions (inside diamter x depth) refer to the socket-weld ends.