Dk 45, Technical data – Flowserve DK 45 User Manual

Page 7

Name plate / marking

Technical Data

Corrosion resistance

The trap body must not be subjected to sharp increases in pressure.
The dimensional allowances and additives for corrosion reflect the latest state of technology.

Sizing

When used for its intended purpose, the safe functioning of the equipment will not be impaired by
corrosion.

The temperature/pressure limit is indicated on the trap body. For more information see GESTRA

technical documents such as data sheets and Technical Information.

According to EN 9 the type and design must be specified on the name plate and trap body.

■

Name/logo of the manufacturer

■

Type designation: DK 45

■

Pressure rating PN

■

Marking according to ATEX: The equipment is not Ex marked.

■

Material number

■

Max. temperature

■

Max. pressure

■

Flow direction

■

Stamp on name plate, e. g. specifies the manufacturing year and quarter,

(in this case the

quarter 005)

Fig. 1

Nominal size

Marking

DK 45

MADE BY GESTRA

PN 40

TMA 400 °C

at 23,1 bar