Daewoo dqd-2100d EU - Manual (Page 8)

Installation
Oper
ation
13
Playing Discs
12
Connecting with Amplifier Having 5.1-CH Analog Terminals
How To Connect
■ Apply this section just to an amplifier without digital audio input terminals.
Only when playing DVD disc, it is available of output.
1 1
Since more than three speakers are
connected, above all, set the Audio
item in DVD Unit.
2 2
You can connect a maximum of six
speakers.
SURROUND
FRONT
SUBWOOFER
CENTER
5.1 CH
AUDIO INPUT
DIGITAL AUDIO OUT
AUDIO OUT (5.1 CH) AUDIO OUT VIDEO OUT
<5.1 Amplifier
with Channel Analog terminals>
To control TV System
Press [SYSTEM] button to control TV Output System.
Every time the user presses [SYSTEM] button, Auto, NTSC and PAL are selected one by one.
Select your unit system.
Press [ ] button to power on.
Press [OPEN/CLOSE] button to open the
disc tray.
Place a disc firmly on the disc tray, making its label
look upward.
Insert the disc and press [OPEN/CLOSE]
button to close the tray.
The disc tray is closed and after checking the disc’s
condition, Playback or Stop function starts to
operate.
Various Playback Methods
■ If you want fast (or reverse) playback,
press [ ] or [ ] button in Playback
mode. You can watch fast playing (reverse)
screen.
* This reverse playback can be unavailable for
certain DVD. Unavailable for MP3.
■ If you want slow (or reverse) playback,
press [ ] or [ ] button in Pause mode.
You can watch the desired screen in the
slow forward (reverse) playback.
* For the case of Video CD, this reverse slow
playback function is unavailable. The
mark will appear.
■ If you want still picture, press [PAUSE]
button in Playback mode. You can watch
the desired screen in Pause status.
■ For Shuttle Ring on front panel {DQD-
6100D only}
1 1 In playback mode, rotating this shuttle
in clockwise makes the playback speed
change in the below orders;
x 2
x 20 x 30 x 80
2 2 In playback mode, rotating this shuttle
in counter clockwise makes the playback
speed change in the below orders;
x 2 x 20 x 30
x 80
3 3 In pause mode, rotating this shuttle ring
make screen advance frame by frame.
To playback it, press [PLAY] button.
• In the case of DVD,
DVD menus and titles are displayed on TV screen.
• In the case of S-VCD and VCD2.0
the menus are displayed on TV screen and it is
converted into PBC(Playback Back Control) mode.
• In the case of CD, VCD1.1 and MP3,
the disc plays in order of its track numbers.
To stop it, press [ ] button.
For pause, press [PAUSE] button in playback mode.
If you press [PLAY] button, it starts playback again.
Press [OPEN/CLOSE] button to remove
the disc.
If you press no button in 5 minutes after you are
opened the tray, the player closes the tray automatically to
prevent from damage.
PLAY S EARCH F ORWARD S EARCH B ACKWARD
x 2
x 20
x 80
x 30
x 80
x 2
x 30
x 20
1 1
2 2
3 3
4 4
5 5
6 6