Directed Electronics 431R - Manual (Page 9)

5
© 2000 Directed Electronics, Inc.
Transmitter Functions
This system is programmable, making it possible to assign any trans-
mitter button to any specific receiver function. The remote initially
comes programmed with Standard Configuration, but may also be
customized by an authorized dealer. The buttons in all of the instruc-
tions in this manual correspond to a Standard Configuration remote.
Button I
The arm/disarm/panic functions are usually controlled by .
Button II
Silent Mode ™ , Remote Valet ® , and an optional auxiliary function
(such as trunk release) are usually controlled by . (Silent Mode
and Remote Valet work by pressing for less than one second.
An optional auxiliary output is controlled by pressing and holding
for 1.5 seconds.)
This auxiliary output controls ____________________________.
Buttons I and II
A user-assigned convenience or expansion option that you have
added to your system can be activated by pressing and
simultaneously.
This auxiliary output controls_____________________________.
NOTE: If using an optional four-button remote, the Standard
Configuration may be assigned to buttons III and IV of the transmitter.
Standard Configuration