Directed Electronics 431R User Manual
Page 13
9
©
2000 Directed Electronics, Inc.
Use the Silent Mode to temporarily turn off the arm or disarm
chirps by briefly pressing
before either arming or disarming.
The confirmation chirp(s) will then be eliminated for that one
operation only. To permanently turn off the arm and disarm chirps,
contact your installation dealer.
NOTE: The Warn Away Response to lighter impacts is bypassed if the sys-
tem is armed using the Silent Mode. This ensures that the siren does not
chirp in an environment where you do not want chirps to be emitted. The
system is still capable of being triggered by heavier impacts; only the
Warn Away Response generated by light impacts is bypassed.
Valet Mode prevents your security system from arming and trigger-
ing either automatically or with the remote transmitter. In Valet
Mode, the system will not arm, but all convenience functions (door
locks, trunk release, etc.) remain operational. This feature is use-
ful when washing or servicing your vehicle. You can access Valet
Mode either manually or from the remote transmitter.
To enter or exit Valet Mode with the Valet switch:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
switch within 10 seconds.
The status LED will light solidly if you are entering Valet Mode and
will turn off if you are exiting Valet Mode.
DRW-35
Valet Mode
Silent Mode