Directed Electronics 431R - Manual (Page 17)

13
© 2000 Directed Electronics, Inc.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1 Instant trigger for optional
hood or trunk pins
2 A heavier impact detected by
the Shock Sensor
3 Door switch trigger
5 Ignition trigger
NOTE: The LED does not report when the Warn Away ® response has been
activated; it only reports Triggered Sequences.
Code Hopping ™
The receiver and transmitter use mathematical formulas called
algorithms to change their codes each time the transmitter is used.
This Code Hopping technology has been developed to increase the
security of the unit. By following this set code sequence, the
receiver and transmitter stay synchronized, even if the transmitter
is used out of range of the vehicle. If, however, the transmitter is
pressed many times out of range, or the battery is removed, the
transmitter may get temporarily out of sync and fail to operate the
system. To resynchronize the transmitter, simply press several
times within range of the vehicle. The system will automatically
resynchronize and the transmitter will respond normally.