Flowserve Spring Diaphragm Rotary Actuators User Manual
Page 12

flowserve.com
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended
function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide
variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The pur-
chaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should
read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in
connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as
a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this
product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice.
Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.
© 2009 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.
United States
Flowserve Corp.
Flow Control
Flowserve Valtek Control Products
1350 N. Mt. Springs Parkway
Springville, UT 84663 USA
Phone: 1 801 489 8611
Fax: 1 801 489 3719
Regional Headquarters
1350 N. Mt. Springs Prkwy.
Springville, UT 84663
Phone: 801 489 8611
Fax: 801 489 3719
12 Tuas Avenue 20
Republic of Singapore 638824
Phone: 65 862 3332
Fax: 65 862 4940
12, av. du Québec, B.P. 645
91965, Courtaboeuf Cedex,
France
Phone: 33 1 60 92 32 51
Fax: 33 1 60 92 32 99
Quick Response Centers
5114 Railroad Street
Deer Park, TX 77536 USA
Phone: 281 479 9500
Fax: 281 479 8511
104 Chelsea Parkway
Boothwyn, PA 19061 USA
Phone: 610 497 8600
Fax: 610 497 6680
1300 Parkway View Drive
Pittsburgh, PA 15205 USA
Phone: 412 787 8803
Fax: 412 787 1944
FCD VLAIM050-01 Printed in USA.
VALTEC NO. 185064
To find your local Flowserve representative
or for more information about Flowserve Corporation, visit
www.flowserve.com.