Flowserve APEX 5100 Current-to-Pressure Transducers - Manual (Page 2)

PS0003-CV (CVAUTO-200) 05/03 Page: 2 of 4
© 2003, Flowserve Corporation, Printed in USA
Automax Valve Automation Systems
Product Specification
Flowserve Corporation 1350 N. Mountain Springs Parkway 1978 Foreman Dr.
Flow Control Division Springville, Utah 84663-3004 Cookeville, TN 38501
www.flowserve.com Phone: 801 489 8611 Phone: 931 432 4021
Features:
1. RFI immunity to both externally radiated RF and cable-conducted RF is provided by a conductive housing
and signal input filters.
2. Current loop connections are highly accessible and deplugable simplifying installation.
3. LED loop power indication simplifies troubleshooting.
4. Sensors automatically compensate for temperature fluctuations.
5. Internal regulator compensates for supply pressure changes.
6. Pressure feedback for precise output control, regardless of position, even under heavy vibration.
7. Internal zero and span calibration.
8. Integral filter provides initial startup protection against tubing scale or dirt.
Note: the integral filter is not designed to act as a permanent source of clean, dry air.
1/2" NPT
Conduit Hub EMF and RFI
Protected
Built-In
Filter/Regulator