Flowserve APEX 5100 Current-to-Pressure Transducers User Manual
Flowserve Hardware
PS0003-CV (CVAUTO-200) 05/03
Page: 1 of 4
© 2003, Flowserve Corporation, Printed in USA
Automax Valve Automation Systems
Product Specification
Introduction:
The Apex 5100 I/P Module provides accurate
3-15 psi pneumatic signals for the Apex 5000
Positioner (shown). It receives 4-20 mA current
input and only requires six volts to operate.
The 5100 I/P has many advanced features
including: RFI protection, internal closed loop
control, integral filter (for start-up protection),
and automatic temperature compensation.
Applications:
The Apex 5100 I/P Module’s internal closed loop control system makes it insensitive to installed position. In
addition, this feature enables steady output under the most severe vibration. This transducer may only be used
with the Apex Modular Positioning System (A.M.P.S.)
The Apex 5100 is designed to NEMA 4 specifications. It requires only 6 volts minimum DC power, enabling
series operation with other devices on 24 VDC current loops.
The I/P housing is constructed of durable die-cast aluminum and treated with a dichromate undercoat and
polyester powder top coat for protection against the toughest applications in all process industries including:
1. Chemical and Petro-Chemical
2. Power
3. Food and Beverage
4. Pharmaceutical
5. Municipal
6. Wastewater treatment
APEX 5100 Current-to-Pressure Transducers
(I/P Modules)
Flowserve Corporation
1350 N. Mountain Springs Parkway
1978 Foreman Dr.
Flow Control Division
Springville, Utah 84663-3004
Cookeville, TN 38501
www.flowserve.com
Phone: 801 489 8611
Phone: 931 432 4021