Flowserve NRG 16-11 - Manual (Page 19)

9
Disposal
Decommissioning
Remove the level electrode and separate the waste materials in accordance with the material
specification.
Electronic components (boards) must be disposed of separately.
For the disposal of the level electrode observe the pertinent legal regulations concerning waste
disposal.
Danger
Risk of severe burns and scalds to the whole body!
Before removing the level electrode make sure that the vessel or measuring pot are
depressurised (0 bar) and cooled down to room temperature (0 °C).
Declaration of conformity
Annex
We hereby declare that the equipment NRG 16-11, NRG 17-11 and NRG 19-11 conform to the
following European guidelines:
■
LV guideline 73/3/eec version 93/6
■
EMC guideline 89/336/eec version 93/68/eec
■
ATEX guideline 94/9/EC of 3 rd March 994
■
LV standard EN 5078
■
Pressure Equipment Directive PED 97/3/EC of 9 th May 997 (provided that the equipment is not
excluded from the scope of this directive according to section 3.3)
Applied conformity assessment procedure: Annex III, Module B and D, verified by the notified body
055.
This declaration is no longer valid if modifications are made to the equipment without consultation
with us.
Bremen, 0 th February 004
GESTRA AG
Quality Assurance Manager
Dipl.-Ing. Lars Bohl
(Academically qualified engineer)
Head of the Design Dept.
Dipl.-Ing. Uwe Bledschun
(Academically qualified engineer)