Installation – Flowserve NRG 16-11 User Manual

Page 13

Important notes

■

The installation of two low-level limiters in one standpipe is not allowed according to

TRD!

■

For the approval of the boiler standpipe the relevant regulations must be observed.

■

For typical installation examples refer to page 4.

■

When mounting the electrode laterally make sure that the inclination angle does not

exceed 45° and that the length of the electrode rod is limited to 000 mm.

Fig. 11

■

If the electrode is installed outdoor, it

must be provided with a weather-proof cover

supplied by GESTRA.

Tools

■

Open-end spanner A. F. 3

■

Open-end spanner A. F. 36

■

Scriber

■

Hacksaw

■

Flat file, cut

Installation

– continued –

This manual is related to the following products: