Flowserve 2000 Series Digital Positioner - Manual (Page 20)

42-20
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Pressure and Temperature Sensor Spare Part Kits
Kit 1 - Viton O-ring Replacement Kit
Part No.
10061027
Item No. Description Quantity
6 Environmental O-ring, Viton 2
8 Environmental O-ring, Viton 4
10 O-ring seal, Viton 2
20 Environmental O-ring, Viton 2
21 O-ring seal, Viton 2
Configuration Drawing Numbers: 83883, 83891,
83904, 83884, 83892, 101565, 83887 83900,
127586, 83888, 83901
Kit 2 - Spiral Wound Gasket Replacement Kit
Part No.
10061028
Item No. Description Quantity
6 Environmental O-ring, Viton 2
8 Environmental O-ring, Viton 4
10 O-ring seal, Viton 2
20 Environmental O-ring, Viton 2
21 Spiral wound gasket seal 2
Configuration Drawing Numbers: 83938, 83890,
122670, 83886, 83903, 127563, 83899, 127632
Kit 3 - PTFE Gasket Replacement Kit
Part No.
10061029
Item No. Description Quantity
6 Environmental O-ring, Viton 2
8 Environmental O-ring, Viton 4
10 PTFE gasket seal 2
20 Environmental O-ring, Viton 2
21 PTFE gasket seal 2
Configuration Drawing Numbers: 122513, 127565
See Body Mount Sensor Configurations Drawing and Remote Mount Sensor
Configuration Drawing for item numbers.
Kit 4 - Kalrez O-ring Replacement Kit
Part No.
10061113
Item No. Description Quantity
6 Environmental O-ring, Viton 2
8 Environmental O-ring, Viton 4
10 O-ring seal, Kalrez ™ 2
20 Environmental O-ring, Kalrez 2
21 O-ring seal, Kalrez 2
Configuration Drawing Numbers: 83885, 83889,
127665, 83893, 83902
Pressure Sensor Hardware Kits
Kit 5 - Pressure Sensor Connection Kit, Div II
Non-incendive Configuration
Part No.
10061022
Item No. Description Quantity
3 Swagelok nut 2
4 Swagelok ferrules 2
5 Sensor nut 2
6 Environmental O-ring, Viton ® 2
7 Division II sensor fitting 2
NOTE: Kit will service two pressure sensors.
For class I, Division II, Group A, B, C, & D.
See Table XIII for Tubing.
Kit 6 - Pressure Sensor Connection Kit, Div I
Configuration
Part No.
10061023
Item No. Description Quantity
13 Division I sensor fitting 2
5 Sensor nut 2
6 Environmental O-ring, Viton 2
NOTE: Kit will service two pressure sensors.
For class I, Division I, Groups B, C, & D.
NOTE: Kits 1 thru 4 will service two body or two remote-
mount pressure sensors from any one of the pressure
sensor configuration drawing numbers listed below
each table.
Pressure Sensor Gasket Kits