Flowserve XL90 Series - Manual (Page 16)

48-16 Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Intrinsically Safe Proximity Limit Switch Kit, NAMUR Shaft
End Connection – Part No. 10118458
Item No. Description Quantity
52 Cam Shaft 1
112 Retaining Ring 2
128 Jam Nut 1
130 Electronics Kit (Includes shaft cams, 1
magnets, spring, circuit board and
mounting spacers and screws)
Proximity Limit Switch Kit, SPDT, NAMUR Shaft End
Connection – Part No. 10118457
Item No. Description Quantity
52 Cam Shaft 1
112 Retaining Ring 2
128 Jam Nut 1
130 Electronics Kit (Includes shaft cams, 1
magnets, spring, circuit board and
mounting spacers and screws)
Intrinsically Safe Proximity Limit Switch Kit, Double D Shaft
End Connection – Part No. 10118450
Item No. Description Quantity
52 Cam Shaft 1
112 Retaining Ring 2
128 Jam Nut 1
54 Lock Washer 1
55 Nut 1
130 Electronics Kit (Includes shaft cams, 1
magnets, spring, circuit board and
mounting spacers and screws)
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this
Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve
products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service condi-
tions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible
applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation
and maintenance of Flowserve products. The purchaser/user should read and understand the Installation, Operation, Maintenance (IOM)
instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the
specific application.
While the information and specifications presented in this literature are believed to be accurate, they are supplied for informative purposes
only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be
construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continu-
ally improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change
without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any of
its worldwide operations or offices.
For more information about Flowserve and its products, contact
www.flowserve.com or call USA 972 443 6500.
Regional Headquarters
1350 N. Mt. Springs Prkwy.
Springville, UT 84663
Phone 801 489 8611
Facsimile 801 489 3719
12 Tuas Avenue 20
Republic of Singapore 638824
Phone (65) 862 3332
Facsimile (65) 862 4940
12, av. du Québec, B.P. 645
91965, Courtaboeuf Cedex, France
Phone (33 1) 60 92 32 51
Facsimile (33 1) 60 92 32 99
Quick Response Centers
5114 Railroad Street
Deer Park, TX 77536 USA
Phone 281 479 9500
Facsimile 281 479 8511
104 Chelsea Parkway
Boothwyn, PA 19061 USA
Phone 610 497 8600
Facsimile 610 497 6680
1300 Parkway View Drive
Pittsburgh, PA 15205 USA
Phone 412 787 8803
Facsimile 412 787 1944
For more information, contact:
Flowserve and Valtek are registered trademarks of Flowserve Corporation.